How To Outsource A Project From Start To Finish
Facebook Youtube
boximg

How To Outsource A Project From Start To Finish

Feb2018-MainImage

Hi, and welcome to another ‘1st of the month’ blog post here on AidanBooth.com!

With the New Year already becoming a distant memory, are you getting enough done, or is time already becoming an obstacle for you?

Regardless of where you’re at, you NEED to be leveraging outsourcing…

By hiring an outsourcer, you can focus on tasks where you can derive the most value, and outsource those that give you less return for your valuable time, or don’t necessarily have the skills to complete, and best of all it’s really easy to do!

I want to show you how easy it is, so today in this blog post I’ll walk you through a case study, showing you how I created the sketch below, using outsourcing:

Final design

I’m pretty happy with how it came out… but there was an entire process (a simple one) behind this.. it saved me HOURS of work only cost me $70.

So here’s what we’ll cover:

  • The EXACT 10-Steps To Outsourcing A Job On Upwork
  • Choosing The Best Proposal
  • How To Filter The Candidates Proposals
  • When To Decline Proposals
  • What Can You Do If You Don’t Get Many Job Proposals
  • How To Hire The Right Candidate For Your Project
  • Amending Your Project And The Finished Result
  • How To Finish The Contract With Your Candidate
  • How To Leave Your Candidate Feedback
  • And MUCH more…

Below you’ll find four ‘over-the-shoulder’ videos where you can see the exact approach I took to outsourcing this job, and below the videos you’ll find step-by-step screenshots of the entire process.

Video 1: Getting Started

 


The video above gives you an introduction to the project, and how I’m approaching it.

Video 2: Proposals & Freelancer

 


In this video we look at the proposals received so far, and set up the job on Freelancer.com as well.

Video 3: Hiring My Designer

 


Finally I’m able to hire my designer! The video above walks you through the considerations…

Video 4: Final Overview

 


This video gives a full overview of the process, and shows the back-and-forth messages.

The Exact 10 Steps To Outsourcing A Job On Upwork

So what outsourcing company should you use?

It really makes no difference if you’re using Upwork, Freelancer, Onlinejobs.ph, etc., they are all more or less the same. Some of them have got different features but they are all great places to find people to work with.

In the following example, we’re going to turn the following simple mind map about building ‘the perfect online business’, into a really nice sketch:

Mindmap

By searching on Google, I found some examples of sketches that I liked the look of which I will use as my example in this case:

Sketch

So to post a job on Upwork, firstly log into your Upwork account (or register if you don’t already have one), then complete the following steps:

1. Click ‘Post a New Job’:

Post a New Job

2. Select the option for ‘Create a new job post’, then click ‘Next’:

Create a new job post

3. On the next screen ‘What do you need help with?’, type in what type of work you want done, and choose a name for your job post. Once this is completed, press the ‘Next’ button:

What do you need help with

4. On the next screen ‘What specifically are you looking for?’, select the most relevant option, and then click the ‘Next’ button:

What are you specifically looking for

5. On the next screen, ‘Post a Job’, where it says ‘Describe the job’, here you can enter your job description. Typically we have this already written out in a notepad document, so it can be simply copied and pasted in:

Describe the job

A really good tip here is to enter a special code into the description, we typically don’t deal with anyone that doesn’t use the code in their response, it basically shows they haven’t read the description in full:

Description code

6. Remember to attach your project files, choose the type of project, and then choose ‘which of the following best describes your project?’:

Job Posting (2)

7. As we continue down the page, ‘Where will this work be used?’, select the most relevant option:

Job Posting (3)

8. Choose ‘How many freelancers do you need to hire for this job’, and then choose from ‘Do you only want freelancers within your country to see and submit proposals to this job?’:

Job Posting (4)

9. Choose a start date, and then enter the skills required:

Job Posting (5)

10. In the ‘Rate and Availability’ section, choose ‘How would you like to pay’ using the dropdown, the budget for the project, and click on the relevant ‘Desired Experience Level’:

Job Posting (6)

When you are happy with your selection, simply click on the ‘Post Job’ button, and you’re all done posting your job 🙂

Job Posting (7)

So that’s the first part of the process complete, and your job post is now live 🙂

Job post is live

People will now start to send messages and apply for the job, and also tell you how much they will charge to carry out the job.

TIP: You can’t really go wrong with your job posting, because you can always change things later 🙂

Choosing The Best Proposal

Once your job posting has gone live, you’ll start to receive proposals, the aim here is to choose the best proposal suited to your project.

As you can see in our example, there have been 5 proposals from the job we posted 3 days ago:

Postings

When we click on the job post, under ‘All Proposals’ we can see more information about the proposals we have received:

Proposals

In the screenshot above, you can see 4 out of the 5 have included the special code in their response that we put in the description.

My advice; one candidate didn’t use the special code in their response, this shows they didn’t read the description fully, so don’t even bother proceeding with the proposal, simply archive the candidate:

Archive Candidate

How To Filter The Candidates Proposals

We then want to open up each proposal and start looking through them, check out samples of their work so see if it is anything like what you had in mind.

Having gone through the samples of work in our example, this is the one most similar to what I’m looking for:

Sample

If you have questions, simply contact the candidate by messaging them, which is also a really good test of response time:

Send Message

When To Decline Proposals

Now you’ve filtered through your proposals, you need to know when to decline them, here’s our top tips for which proposals to decline:

  • Any proposals with $0 earned (unless they had some really amazing work in the past)
  • Any proposals that don’t show an example of the work you have requested
  • Any proposals where you might need to teach or test the candidate
  • Any proposals that don’t use the ‘special code’ in their response

For any that fit the above criteria, simply archive the candidate(s) as we’ve shown above.

What Can You Do If You Don’t Get Many Job Proposals

5 proposals in our example was actually quite a low response, there may be a few reasons for this such as:

  • Maybe the price was too low
  • Maybe the title wasn’t descriptive enough

You can certainly change those things to see if you get a better response, but bear in mind you can also use another outsourcing company.

In this case we’re going to post the same job on Freelancer to see if we can get a better response, here’s the exact steps for doing that:

1. Log in to Freelancer (or register), then click on ‘Post a Project’:

Freelancer - Post a project

2. Use the exact same name and description for your project that you used previously by simply copying and pasting the information from your notepad file:

Freelancer - what you need done

3. Continue down the page, upload your sample work, add skills under ‘What skills are required?’, and click on your chosen option for ‘How do you want to pay?’:

Freelancer 2

4. Select your budget, from the dropdown options under ‘What is your estimated budget’, and then click on ‘Post My Project’:

Freelancer 3

You’re job listing on Freelancer is now live, although bear in mind we’re not really comparing apples with apples here.  With Upwork we had a budget of $50 or less, however, with Freelancer, the budget range is $30 – $250, so we’ll get more people who bid for the project.

Again, pay attention to the special code word, and only research proposals further if it has been included within the candidates response.

How To Hire The Right Candidate For Your Project

So we’ve now got our proposals whittled down using the tips above, we’ve been discussing the job with a couple of different candidates on Upwork who both have a great skill set:

Chosen Candidates

I eventually choose the following person who confirmed she could do the job digitally which is great in case of any spelling mistakes for example as they can be amended easily, rather than a hand drawn sketch.

Chosen Candidate

You’ll note they bid $70 rather than the $50 we had in mind. You can try to negotiate the price if it’s higher than you originally planned, but remember the candidates also have an outsourcer fee, and in our example the mind map also has a lot of things in it, so in this case I’ve decided to run with it.

TIP: Don’t negotiate too hard if it looks like they are going to do a really good job. It’s better to build a relationship first and then talk about pricing later

The candidate has also provided examples of the types of things they can do which is similar to what I’m looking for:

Example 1:

Example 1

Example 2:

Example 2

Save the candidate and also any others you may consider for a different job in the future:

Save Candidate

Hiring The Freelancer

To actually hire the freelancer, use the following steps:

1. Click ‘Hire Freelancer’:

Hire Freelancer

You will then see the following screen:

Hire

2. Scroll down the screen and accept the terms of service, then click on the ‘Hire’ button:

Hire 2

3. Agree to depositing funds into escrow:

Deposit funds

Escrow is a payment service that protects the employee, and the employer (you). The basic Escrow process is as follows:

  1. You hire a worker
  2. You deposit 100% of the job cost into an Escrow account (it’s easy)
  3. When you’re happy that the job has been completed, you release the funds to the worker

4. You then have two options either:

  1. I’m done hiring for this job or:
  2. I plan to hire more freelancers for this job

In this case, we actually hired both freelancers, as we have another job available for a different mind map, so we can test them both as they seem very talented candidates and good resources to use later on.

Offer Sent

You will then see the offer and as we already are hooked up with PayPal, you can see the budget has already been funded:

View Offer

We then continue to communicate with the candidate and get them working on concept designs. Next you’ll see how I go about amending the project, before revealing the finished result!

Amending Your Project And The Finished Result

You may recall we also posted this job on Freelancer, but the results weren’t great with very few replies, hence finding our chosen candidate on Upwork.

So now we’ve found the right candidate for our project, I want to show you an overview of the messages exchanged, the corrections that had to be made, and then show you the final result.

This was the first draft from the candidate:

Yellow Image

In the first instance, we told the candidate we didn’t want it in yellow, so she went away and changed the colors as we requested:

Messages

In the first full example, there were quite a few mistakes, so I opened up the original image and highlighted the different places there were mistakes and added an arrow/comment next to it:

Mistakes 1

The next draft came back with a few more errors, so again we pointed these out using Photoshop:

Mistakes 2

We went back and forth with the candidate until the image was perfect, so here is the final result which we’re really happy with 🙂

Final design

So what could you use this image for, here are a few examples;

* A blog post
* A Facebook post
* An infographic

Hopefully you can see how powerful, and how good a job you can get done for a relatively small budget using Upwork, or indeed any other outsourcing company.

How To Finish The Contract With Your Candidate

Once the work has been completed to your satisfaction, you need to close the contract, here’s how to do it.

1. Click on ‘View Contract’:

View Contract

2. Click on ‘Review & Pay’:

Review & Pay

3. Click on ‘Approve & Pay’:

Approve & Pay

4. On the next screen select ‘End the contract – Work is complete’ then click ‘Send Payment’:

Approve & Pay 2

You will then be asked to re-enter your password. Once this has been done, you’ve now finished your contract with the candidate.

How To Leave Your Candidate Feedback

Once you have paid and ended your contract with your candidate, you can leave them feedback.

Here you want to select the reason for ending the contract, then complete the remainder of the feedback questions:

Feedback 1

You can also leave public feedback, once this has been left, you can end the contract by clicking the ‘End Contract’ button:

Public Feedback

So now you can see how to use Upwork to run a project, you can use these steps in a similar way to handle any project you can imagine, as the process is almost identical each time.

Also bear in mind, that once you have the candidates contract, the process will be so much quicker in future.

As your business grows, it gets harder to do everything yourself, by outsourcing you can focus on your core business, whilst increasing efficiency.

Hopefully you have found this article useful, and wish you good luck with your outsourcing 🙂

All the best,

Aidan

Like what you’ve read?

If so, then click the “GET STARTED” button below. I’ll send you my SEVEN Passive Income Blueprints' and more great content (100% FREE, no strings attached).

34 Comments so far:

  1. Walter says:

    Brilliant guide Aidan, thank you.

  2. Jeremy says:

    In your opinion Aidan, are the best types of jobs to start outsourcing? I need to free up some time, but am not really sure where to begin.

    • Aidan says:

      It’ll depend on what business model you’re using… what are the daily tasks you work though? For example, if you’re running a dropship website (using the 100k Factory model for example), then customer support and order processing are the places I’d start. If you’re working through the ‘7 Figure Cycle’ program, then I think supplier research would be the ideal place to start. Hope this helps!

  3. Andrew Wakelin says:

    Hi Aidan, I thought of the ‘7 Figure Cycle’ program when looking at your article, and then wondered how to do it. Now you have mentioned it in your comment above. How would you pay for supplier research? Do we give a nice we are interested in, then pay by each signup and product list?

    Another great article – keep them coming!

    Thanks for your help.

    • Aidan says:

      Hi Andrew, I’d pay with a base hourly rate, and a bonus for each supplier someone gets… so, perhaps $10/hr + $100/supplier. Set out your criteria, then let your workers loose!

  4. Christine says:

    I love this concept of outsourcing, and have been meaning to do it for ages now. I’m going to set up a job TODAY. Thank you Aidan!

  5. Melissa says:

    Thanks Aidan, more awesomeness 🙂

  6. Sang Hyo says:

    Hi Aidan, awesome guide! I asked within 7FC webinar before regarding supplier research and contacting. Would highly appreciate it if you and your partners can do a webinar session or instruction videos, checklists, guide how to find wholesale suppliers. Would help me a lot because I am living abroad and time zone and work commitments make it tricky for me to do that task.

    • Aidan says:

      Hi Sang Hyo, we’ve actually done this in the weekly training already… and have MUCH more to come on that topic 🙂

      • Sang Hyo Lee says:

        Sorry, my question was misleading. I meant a tutorial how to find a VA and instruct them properly to find wholesellers on my behalf.

        I really like your course and commitment!

  7. Tony Brayley says:

    Thanks, Aidan. This is very helpful.

    Coincidentally, I posted a job on Upwork, for the first time, today. I chose a worker, but I was less careful than you. Hopefully it works out!

    I like the little tip on using a special code or phrase.

    All the best!

  8. Steven says:

    Thank you Aidan. Very much appreciated on your tips and sharings.

  9. Greg says:

    Thanks for the great content, enjoyed it very much and learned a lot. What WP theme do you use for aidenbooth.com ?

  10. Ron says:

    Aidan, your thoroughness and use of pics for illustration was brilliant. I love when somebody takes the extra effort to set up all those screen shots and supporting pics.

    I’m in 7FC and I noted more is coming, but let me riddle you this: I was trying to envision how to entrust someone on the phone to represent you professionally calling important suppliers. It kind of makes me a tad queasy to hand over something this important. Yet I know you, and all the others that scaled, have done exactly this. How did you negotiate any reluctance to hand over those levels of responsibilities (I’m assuming you had some reluctance)? I had to ask because I think this is the next step.

    • Aidan says:

      Hi Ron, I completely understand where you’re coming from.. for me personally, I just know there is always someone out there who is at least as good as I am for these kinds of tasks… it’s really not rocket science, it’s just communication, where the suppliers actually NEED us… so we have that in our favor. I recommend you structure supplier outreach on an hourly rate + bonus for each supplier obtained, this way your worker is motivated to get results.

  11. Richard Walker says:

    Great article. I have to now used Fiverr only as I usually have only small jobs that I pay $5-$30 for. I also find Fiverr easy to use. Will remember this article when I need to outsource bigger jobs and maybe want more quality.

  12. Anand says:

    Great post Aidan. I really need to let go and hire help. This will help

  13. Thanks Aidan. Awesome as ever 🙂

    Very useful post – and very timely for me. I’m just about to embark on outsourcing some of my work on my Shopify dropshipping business so as to free up time to work on the 7FC Wholesale FBA business with you guys 🙂

    • Aidan says:

      Good to hear Barry, would love to hear how you get on, you’re definitely doing the right thing by outsourcing your dropship stuff.

  14. Roy Evans says:

    Wow. That is a lot of info. I have to give it a try.

    Roy

  15. Orlando Masis says:

    Hi Aidan, Great article! I’m in 7FC and I had been wondering what or when to outsource for and this post opened my eyes. Especially reading through the questions and answers above. On another note, I was also wondering, how many suppliers would you consider to be a good number of suppliers? Is this something that needs to be done consistently? Adding a large database of suppliers that is? I look forward to hearing from you.

    • Aidan says:

      Hi Orlando, 1 good supplier could make you $500k/year. 10 crappy suppliers might make you $10k/year. So it’s not really about the number of suppliers, but how ‘good’ they are. It’s always a bit of a lottery to begin with.. most suppliers will have at least a few products that’ll be able to make you money.. my advice would be to just keep pushing forward with supplier research, as more suppliers will always help (and eventually you’ll just hit a limit where you’ve got all you can handle from a cash perspective). Also, supplier outreach is a GREAT thing to outsource.. so maybe give that a try.

      • Orlando Masis says:

        Thanks, Aidan! That makes sense. Another question. Is there a way to delete suppliers from PH? I uploaded a couple of supplier files that had scientific formatting for the UPC codes and I just wanted to get rid of them before we actually start putting in more suppliers. I hate clutter. Thanks!

        • Aidan says:

          Hi Orlando, we had that feature, but took it out… as some people were deleting supplier files before they finished processing. I’m sure we’ll add it back in once we figure out a better way to do it 🙂

  16. Kateline Guedes says:

    Very helpfull article Aidan!
    Thank you!

Leave a Reply to Sang Hyo Lee Cancel reply

Your email address will not be published. Required fields are marked *

boximg

Clicky

Get The Passive Income Cheatsheet (And Free Updates)...

x